Activity Stream

My Kitfox 4 Speedster project has that same plate on top. All I can say about it is that when I took everything apart,...

I also used some (.040") safety wire similar to what you did because I didn't want the bolt to rotate in that hole... I...

These are the directions I followed. I'm happy with the way my varnishing project worked out. ...

Sorry mine sold

Time to move this wing out of the heated room and bring in the other. Ironing the pinked edges of the finishing tapes...

Thanks all. Yes its the polyfiber epoxy varnish. I have 2 coats on now and think that's plenty. I thinned the...

No idea what varnish your using. In the PolyFiber manual it states (for the epoxy varnish) On my Kitfox and Skybolt...

Hi Jerry, I did two coats - seemed like what was needed. I think there is going to be some variability between...

Following advice in this thread: https://teamkitfox.com/Forums/threads/701-Help-please-with-flaperons Used gel...

I am going to check on some fabric and see what around. Thanks

Can't wait to feel the boost!

I also used a light suede type fabric glued down with the same stuff used for glare shield and seat pan. Also have tie...

When I have cargo its usually full so I don't need a net. I find when I have day survival bag or my flight bag it...

Excellent work. I'm going to say you're jumping the gun with the orange thread locker on those rudder pedal brackets. ...

Black bed liner & 6 tie down rings.

The vendors description: https://www.fabricempire.com/24-x-24-square-foam-sheets.aspx The backs and the bottoms...

I wasn’t a fan of the way the manual wants it safety wired. My dad took a quick look and came up with this idea. ...

Thats a good idea drilling the hole in the mixer assembly for the safety wire.

What kind of foam did you use? Gesendet von iPhone mit Tapatalk

I do have tie down loops at each bolt/screw. I had considered the truck bed spray that Eddie and Dustin used....

I did the same as eddie. Works good. My Brother used a light weight felt fabric and it works better for keeping...

I sprayed mine with a can of truck bed liner. Turned out very nice IMO.

No, I just painted the floor. I would be more concerned to have a net or tie down points than an anti slip floor. I put...

John - When we landed, the closest airport (8 miles away) was reporting winds to be 11G17, 270-290. Having flown the...

Looking great Mark! Sent from my iPhone using Tapatalk

Nice work Carl! Well done and all best for the great adventures that lie ahead for you. cheers ross