Activity Stream

Unfortunately from what I was told on the Rotax-Owners page you cannot just replace the pumps because the new pumps...

You just replace the pumps I take it, not the assembly. Lyndon

Very cool, thanks Jim, I will likely replicate this. Actually come to think of it I did use the bottom tube to tie the...

Its really light and compact; easily carried in the compartment under the seat, compared to a long pvc pipe w/foam pool...

Here is the rudder gust lock that I use on my SS7:

I definitely agree that I'm going to have to replace the fuel pumps as even if I was daring enough to fly with them...

My personal opinion-I think charging you that $600 reflects poorly on Murphy because it was their mistake that caused...

Jim, I'd love to see your gust lock setup if you have a picture. I have a model IV that I transport in an enclosed...

Awesome, thank you all for the advice! I ended up razoring around the tubes so that they poke through and the fabric...

Definitely leave the tubes open at the base of the vertical fin because you will need it if you ever trailer your...

I second the comment about the Dynon Skyview. I went with the Skyview without the ACM or the premade harnesses, but...

Hi Damien. We burned a hole for the tubes and put a round fabric backer around it. The rudder cable holes are cut just...

I left the tubes that stick out at the bottom, but early on I noticed that the tube through the base of the vertical...

I don't have experience with GRT but have heard great things. If you end up considering Dynon, I highly recommend them....

Thanks for sharing the bushing info. I wasn't aware of this type. It looks like a good upgrade from the original. ...

Did any builders out there end up leaving the fuselage pass-through tubes for the old tow system intact? I'm about to...

Sorry, I missed this response. I have taught myself enough illustrator to be dangerous and I'm currently experimenting...

Lot's of good info here thanks. I ended contacting MGL avionics as well and apparently they have a similar adapter...

I'd give them a call. They are really helpful, easy to talk to and a no pressure operation. You'll most likely have...

Recently I was trying to get everything together that needed varnished or glued so I could heat my workspace and let...

I think what they're telling you is that the EIS cannot receive CAN data, so it won't work with the 912iS unless all of...

I think what they're telling you is that the EIS cannot receive CAN data, so it won't work with the 912iS unless all of...

Traditional Breakers. My Master, Avionics, and alt/power supply circuits are rocker circuit breakers.

Here is my email I sent to GRT. "Hi I'm curious if your avionics has the ability to receive data from the Rotax 912is...

I know they've been around for a long time but this thread is more about looking for people who have used their systems...

1.1 About the Trig TY91 The Trig TY91 com radio is useful to Horizon 10.1 users because it interfaces with the EFIS...