Hi folks,
Who is using an AOA in their planes?, How did you do the calibration, with/without flaps and what AOA system are you using. Would you install one again, same one?
Jim
Hi folks,
Who is using an AOA in their planes?, How did you do the calibration, with/without flaps and what AOA system are you using. Would you install one again, same one?
Jim
I have a Dynon D810 in the Mangy. It uses one of their "double" pitot tubes.
They have a procedure to calibrate both with and without flaps. I have been very happy with the performance. There is a visual display on the Dynon screen and had an audio output that I put into the intercom system.
I would install it again.
I did the Garmin AOA with the G3X Touch display and I really like it. It displays on the screen and has an aural warning too that goes from slow beeping to full on sound as you approach the stall. The AOA was very easy to calibrate.
Normally I just use the aural warning to give me an idea of how close the wing is to stalling when I am doing STOL landings.
Phil Nelson
A&P-IA, Maintenance Instructor
KF 5 Outback, Cont. IO-240
Flying since 2016
I have the Advanced 5600 with AOA. Cal proceedure is straight forward. AOA is a welcome addition to flight safety and makes for better landings. Would miss it if not there.
You can hear mine in this video at the 17:30 mark.
https://youtu.be/HEJNI77TZFg
This may sound a bit strange to some, but I've always wondered if you just kept really good notes on your planes stall speeds as if you were calibrating an AOA, and then you put your findings somewhere on your panel as a reminder of speeds to use, wouldn't that be just as effective as an AOA?
I'm not trying to be a smart ass, just wondering if someone can convince me how wrong I am?