The dorsal came standard on my Super Sport. It might be a good idea to install one so that your plane looks as up to date as possible (helps with resale).
The dorsal came standard on my Super Sport. It might be a good idea to install one so that your plane looks as up to date as possible (helps with resale).
I'm convinced! It shall be installed.
Thanks all,
Doug
Super Sport
912ULS
Constant Speed IVOProp
I am looking for the instructions for installing the razorback option. It came with the kit I have, but I can't find any reference to it in my build manual. If anyone would be able to share the instructions, I would really appreciate it. It looks like it's pretty simple, but I just want to make sure I don't miss anything.
Thanks in advance for any help.
Bob
I would like to get one of these! I didn't see it in the Kitfox catalog. ANyone have any pricing info??
Jeff
KF 5
340KF
Look at Tom Waid's build website. I believe he made his own razorback. It looked simple and easy. Maybe he will chime in and post a link to the right pages.
Jim Ott
Portland, OR
Kitfox SS7 flying
Rotax 912ULS
jiott
Found it. Thanks for the heads up. You're right, looks easy enough...
Jeff
KF 5
340KF
Rick
I used 6061-T6 aluminum 5/8" OD x 0.509 ID x 0.058 wall.
I think I bought 6 feet
Than I bought 1 foot of 6061-T6 aluminum 1/2" OD x .0.043 ID x 0.035 wall.
With this I could slip the 1/2" tube inside the the 5/8" tube and epoxy it to the exact length.
I took about 4inches of the 1/2" tube, cut it in half length wise and welded it to about a 6" pc of 1/2" tube to make a (T) shape that slipped inside the 5/8" tube. The 4" half moon pc was epoxied to the fuselage frame.
I had a co-worker do the aluminum weld. I do not have a welder for that.
To bend the tube I made a template from 3/4" thick plywood and screwed it to a wood work bench. Worked great.
I made the wood supports from aircraft grade 1/8" thick plywood.
See pictures.File_000.jpgFile_001.jpgFile_003.jpg
Go Here!
My SS may be one of the last with this type of razorback.
Kitfox SS, 912 ULS
http://tropicaltuba.com/Kitfox%20Project/Kitfox.htm
Is the razorback an aluminum tube or steel?? Looks to be aluminum...
Jeff
KF 5
340KF