Show us your engines!
I'm going to be installing a 912 on my KF4 and would like to see pics of other installations. I’m sure there are some really clean installs.
thanks!
Show us your engines!
I'm going to be installing a 912 on my KF4 and would like to see pics of other installations. I’m sure there are some really clean installs.
thanks!
Kitfox IV - 1200 (1994) #1830
Rotax 912
Grove Gear, Wheels, Brakes
22" Desser Tundra Tires
get with them at kitfox, they know how to do it. the tank will need to be cut down, they can do that. the tubes for the water pump need to be reclocked. they can do that. the intakes need to be switched around so they now face out. the modules need to be removed and put on your motor mount, it's a good idea anyway. just some of the fun you will have.
steve
slyfox
model IV 1200-flying
912uls
IVO medium in-flight
RV7A-flying
IO-360
constant speed prop
Could you take some pics of your engine install? It sounds like it's done nicely. Picture is worth a 1000 words!
Sounds like there are a few tweaks that would be good to see so I know what a good install looks like.
Thanks!
Kitfox IV - 1200 (1994) #1830
Rotax 912
Grove Gear, Wheels, Brakes
22" Desser Tundra Tires
next time I have the cowling off, I'll take a few. I got some new spark plugs to put in, so it shouldn't be too far out. I also did a booboo and pulled up too hard(yank and bank) and blew out my windscreen today. Oh crap. now I got that to do. but I ordered a preformed, don't want that again, this is the third time I've done it over about 10 years. Aren't these planes fun.
steve
slyfox
model IV 1200-flying
912uls
IVO medium in-flight
RV7A-flying
IO-360
constant speed prop
Did you ever find any useful information? I started the 912 install on my Model IV last weekend and was just searching the forums for the same info. The Kitfox instructions don't seem bad so far, but still would be great to have a build log, vlog, or just a photo album to reference as I go.
One is mine,the other is one i use for my installation
Mine was used 912, when i remove the manifold i broke two bolts 😢😩be carefull.
you have to made a new bracket for ingnition box,cut the oil tank,re position the water tank.
good luck