I saw a post awhile back that someone was making Fiberglass Jury Strut Fairings but cannot find it. Does anyone know who is making them? I would like to order a set.
Thank you!
I saw a post awhile back that someone was making Fiberglass Jury Strut Fairings but cannot find it. Does anyone know who is making them? I would like to order a set.
Thank you!
I have made them for several Kitfoxers. Would be happy to do it again, but right now we are in the middle of a rather challenge move to another state and it looks like July or so to get back into the shop. With all that is going on, a timely reminder would help us both.
Lowell
I too would be interested in buying a set of your jury strut fairings. Best of luck with your move.
Me too but your move comes first of course. Best of luck!!
See my build log at:http://www.mykitlog.com/lowandslow/
I just might be interested this time as well. I recall the last time you had delivered a few of these but I was just so focused on getting mine flying as soon as I could. Always appreciate your contributions to the forum not to mention your craftsmanship, Lowell. If I only had 1/2 that, Id be pleased.
Eddie Forward
Flying
SS7, 912iS, Garmin G3X
Also interested! Are they mostly cosmetic or do we have any numbers on them?
Dustin Dickerson
Building 7ss STI x 2
Oratex
29" shock monster
EP912STI 155hp
Garmin
N33TF......FLYING!
N53TF......FLYING!
You do horizontal fairings too dont you?
SS7 O-200 Whirlwind
Sorry for late reply. Back home now and will create a list. Answers - no numbers to my knowledge. The originals were made to make everything in the wind as clean as possible. Some have used the same fairings on the horizontal stabilizer. Since the later models have a larger diameter strut, the curvature is bit thicker after closing the trailing edge. For ease of future correspondence, it would be helpful to send emails direct to me at lcfitt3@gmail.com