Gonna look sweet!
Gonna look sweet!
Jeff
KF 5
340KF
IMG_2228.jpg
I have this idea from her 😉
Miss velma
So we are both inspired by the P-51. Mine was Petie 2nd and 3rd. Do any of you WWII history buffs know what the letters on either side of the star and bar represent?
Just be aware JF that they won’t allow you to put the C and the F together and the reg has to be in a row.
------------------
Josh Esser
Flying SS7
Rotax 914iS
AirMaster Prop
Edmonton, AB, CWL3
Hi team,im now working on cowling,i have a lots of fun because i push the windshield more foward for the look
and That give me more work after..That is why my cowling going down like That 😩
But at the end it’s looking good to me 🤨(give me your opinion on That)
so i install cleco on everything and i dont like the space between the cleco..so i manage to install piano hinge..
much better now..but beside the door like you can see i need to do something???
I think to make like Lowell and put some fiberglass on doorpost tube..
i order the spinner and the internal propeller control from murle william’s..
i have to made the oppening for those blades,pretty easy but now i have to made connections for That .
A other problem it was the oil tank 😡my cowling is more lower
so i cut the tank and give That to my nephew and i try to weld it with tig,but he made a mess
so i re cut the tank and i give That in professional hand and they made a good job..but now my tank are really small 😬tell me if you know what is the minimum i can have in this oil tank???
I see you have fasteners on the lower cowl. If I were to address the gap at the door post I would simply throw one more fastener in the upper cowl. Of course you may have to weld in a tab to accommodate the female half of the fastener.
Eddie Forward
Flying
SS7, 912iS, Garmin G3X
Good idea my friend,thank’s Eddie,i will made That afternoon,i think to used the tab for the door latch 😉
hi guy's ...i hope everybody going well, for me and my familly we are at home since 3 week's......... or more, i dont know ,i lost the time during that
whatever, now i have more time to work on kitfox
here is the center consol, in model 2 it is really tite to pass all stuff like hose and wire ....
so i start by making a paper on at first after that i made one in foam with electric tape all around .
then i spray some hairspray to my wife and stick some fiberglass on that,,,,,,,the result was so badso made a lot of sanding,putey......sanding....resin.....sanding... cuting...and you know what i talking about
i spray primer and same paint iv'e put on control panel(EZ-LINER)
on each side of the consol i instal two aluminum angle on the floor and two aluminum sheet cover with vinyl simili wood...
i need to find something to fill the gap around the flap handle,like rubber...
93183209_3070853106304643_2912762896486236160_n.jpg93473563_3070852889637998_1853309926168854528_n (1).jpg93795105_3070852969637990_6724032307050577920_n.jpg92824114_3070852999637987_807383302515195904_n.jpg