Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 9 of 9

Thread: kitfox 7 propeller advice

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Dave Holl's Avatar
    Join Date
    Mar 2009
    Location
    London England
    Posts
    128

    Cool Re: kitfox 7 propeller advice

    High wing
    interesting comments, the UK Light Aircraft Association who certify home built aircraft in the uk have advised against the IVO as while they say it is good on the smaller rotax engine they feel that with the 912ULS is a bit too violent for the prop as there have been a number of issues with the prop blades cracking, they have advised me that the warp would be a better prop and that there is more experience with this prop on a rotax 912uls in the uk so the story thickens!
    Dave
    Dave Holl
    Building Kitfox MK7
    Rotax 912ULS

  2. #2
    Super Moderator Av8r3400's Avatar
    Join Date
    Jan 2009
    Location
    Merrill, WI
    Posts
    3,048

    Default Re: kitfox 7 propeller advice

    Wow! What a bureaucratic nightmare...

    I know of several people running 912ULSs with IVO medium props without incident. The IVO Ultralight works well and is recommended for the UL (80 hp) and the 2-strokes, but the ULS (100 hp) requires the Medium prop for the reasons you have given.
    Av8r3400
    Kitfox Model IV
    The Mangy Fox
    912UL 105hp Zipper
    YouTube Videos

  3. #3
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: kitfox 7 propeller advice

    I use a Warp medium square tip. I understand some have this prop "shaved" into a taper tip. What is/are the advantage(s) of the taper tip?
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  4. #4
    Super Moderator Av8r3400's Avatar
    Join Date
    Jan 2009
    Location
    Merrill, WI
    Posts
    3,048

    Default Re: kitfox 7 propeller advice

    A "Square Tip" 3-blade warp is too heavy for the 912 gearbox and will cause damage. Rotax will not warranty any damage to the gearbox if a square tip Warp is installed. This is also directly from LEAF and Lockwood seminars at Airventure.

    Tapering the tips lessens the mass (and gyroscopic effects) sufficiently to prevent damage to the gearbox.
    Av8r3400
    Kitfox Model IV
    The Mangy Fox
    912UL 105hp Zipper
    YouTube Videos

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •