Ben, your build log is great to read through - appreciate your efforts!
I have a question about attaching the bottom of the firewall. You show a couple pictures of the firewall, but all of them are from above, and my interest is in how you attached the bottom. The instructions say to install a 1/4" bolt in the firewall (2 places) at the nose gear attach points. I have done that, and enlarged the access points in the floorboards so I can get to the top of the bolt holes from above. My question is whether you installed the bolts with the bolt head on top, or on bottom, and what type of nuts you used. I would nominally use a "nylock" locking nut, but with the normal approach, that would mean I would have a nut and 3 threads hanging off the bottom - not good aesthetically or aerodynamically. Reversing them means going against the convention of sacrificing the nut but the bolt stays in-place should the nut come loose. I am comfortable with the nylock nut on the top, except that this is a firewall, and potentially subject to higher heat than other areas of the aircraft.
Can I ask what you did for these attach points?
I have posted back on June 11 2017, my #202 post. You will find pics of how I accomplished the flush mount and fit of this part. I used Hysol to secure the U-channel. Its still stuck. It isn't structural so nothing to be concerned about really.
Eddie Forward
Flying
SS7, 912iS, Garmin G3X
Well my buddy Josh took her up for the first flight today! Everything went great other than CHT’s got a little hot. He said it flys great! I’m gonna do some lower cowl work to hopefully lower the temps. Had variable winds gusting to 17 and Josh said the kitfox handled it perfectly.
Sent from my iPhone using Tapatalk
Ben Bell
Building 7 super sport
O200 powered
That's good news. I knew it would fly great.
You'll get those cht's down without a problem.
SS7 O-200 Whirlwind
Congratulations! I bet she flies great. We do need pictures too!
Harlan and Susan Payne
Flying FarmFox STI Kitfox N61HP
Rotax 915is, Airmaster prop.
https://www.youtube.com/@KitfoxPilot/videos
Ben Bell
Building 7 super sport
O200 powered
That's awesome man.....
Congrats!
That’s great, Ben! I knew it would fly good… our friend Richard told me what a craftsman you are, and how nice it is. Good goin’!!
John Evens
Arvada, CO
Kitfox SS7 N27JE
EAA Lifetime
Chap. 43 honorary Lifetime