What about a few 44 gallon drums welded end on end to look like an aeroplane and mount an old vertical stabiliser to the rear-most drum.
Concrete half an old axle into the ground (low) and mount the whole shebang onto the hub. Cement a circle around the outside and mark the 4 point of the compass ?
Thanks Rooster!
Good Idea and completely doable here in the Northwest. It gets snow, ice, sun, hail, high wind and beautiful sunny calm flying days.
I may go to that plan. It would be bomb proof. But I am also thinking about lighter.
I was considering pvc pipe framing and styrophoam body with a layer of fiberglass for weatherproofing. Set a bearing under it and paint as necessary. Yours would stay out 365 days a year and never need maintenance. Keep em coming.
How about a big angle iron cross with a vertical tail on the long end of the cross? Pivot at the balance point, use a clutch throw out bearing for the pivot. You could weld horizontal "wings" out of same sheet metal on the sides. That's about what the local airport had before it closed. I tried to get my hands on it but I missed my chance.