We never have been a fan how the NR spinner doesn’t track straight. 3d printers can print very large now so I am working on the design and then making a mold.
We never have been a fan how the NR spinner doesn’t track straight. 3d printers can print very large now so I am working on the design and then making a mold.
Dustin Dickerson
Building 7ss STI x 2
Oratex
29" shock monster
EP912STI 155hp
Garmin
N33TF......FLYING!
N53TF......FLYING!
Wow! You got a big printer!
Are you going to lay it up in carbon fiber?
Building N137DF
STi, Rotax 915is, Airmaster
Yes going to do carbon and vacuum bag it.
Dustin Dickerson
Building 7ss STI x 2
Oratex
29" shock monster
EP912STI 155hp
Garmin
N33TF......FLYING!
N53TF......FLYING!
I love my NR prop. The spinner - not so much. Mine is a bit off plumb as well. I did mess with it some and it is a little better.
"Somebody said that carrier pilots were the best in the world, and they must be or there wouldn't be any of them left alive." Ernie Pyle
Brett Butler
Flying: N46KF, 1998 Model 5 Outback, 912ul 110hp, G3x with 2 axis a/p, Beringer wheels & brakes, SS7 firewall forward, NR prop, Custom paint
Edge has a 15 amp slim alternator that the diagonal brace does not need to be removed.
Dustin Dickerson
Building 7ss STI x 2
Oratex
29" shock monster
EP912STI 155hp
Garmin
N33TF......FLYING!
N53TF......FLYING!
Mold is sanded and prepped!
Making template to cut carbon. I am going to try a wet layup and then vacuum bag it.
Carbon cut and ready for resign.
It worked! Now to figure out how to trim it and to mount it true on the back-plate. Any tips?
Dustin Dickerson
Building 7ss STI x 2
Oratex
29" shock monster
EP912STI 155hp
Garmin
N33TF......FLYING!
N53TF......FLYING!
Diamond coated blade in an oscillating tool or diamond wheel in a Dremel. I got an assortment of the latter for cheap on Amazon.
Looks fantastic, by the way. Well done!
Eric Page
Building: Kitfox 5 Safari | Rotax 912iS | Dynon HDX
Member: EAA Lifetime, AOPA, ALPA
ATP: AMEL | Comm: ASEL, Glider | ATCS: CTO
Map of Landings
Dustin it is always awesome to see the stuff you try doing and how well you make it work out!!! Well done!!
Gary
Gary (Geek) Phenning
Leavenworth (Not the Prison), WA
Kitfox STi N68SG