Need an opinion here. #1 rib is secure. It is 35.5" center on center from the #3 rib, top and bottom, front and back. Fuel tank is sitting there unattached for perspective.

The butt rib is place next to #1, but it is binding aft against the bracket. The brackets each have a little more play as you move fore. The only solution I see is to trim the aft bracket the least amount so that it will not bind, and I can get a 1/16" spacer in between #1 and the butt rib. I am guessing it needs to be trimmed maybe 1/8" to 3/16". I may have to trim the second bracket too, but not much.

Anyone see any problem with this?

img_0728.jpg

img_0729.jpg

img_0730.jpg