Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 19

Thread: LLE Kit (Laker Leading Edge) Composite Leading Edge ??

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Join Date
    May 2017
    Location
    Modesto CA
    Posts
    185

    Default LLE Kit (Laker Leading Edge) Composite Leading Edge ??

    Has anyone installed the composite leading edge? What are the pros and cons on this? Thanks
    Brian

  2. #2
    N213RV's Avatar
    Join Date
    Oct 2011
    Location
    Jackson, MI
    Posts
    181

    Default Re: LLE Kit (Laker Leading Edge) Composite Leading Edge ??

    I installed them on my KitFox SS7.

    Pros: should improve speed and I like the look of the smooth leading edge
    Cons: more work to install vs not installing. Also, be careful of getting too much heat on them when covering. I had a spot that appeared to pull away and form a pocket which was noticeable and I had to adddress.

    Quote Originally Posted by southwind32 View Post
    Has anyone installed the composite leading edge? What are the pros and cons on this? Thanks
    Brian
    Attached Images Attached Images
    -Mike Kraus
    RV-4 built and sold :-(
    RV-10 built and flying
    KitFox SS7 built and flying and now on amphib floats!

  3. #3

    Join Date
    May 2017
    Location
    Modesto CA
    Posts
    185

    Default Re: LLE Kit (Laker Leading Edge) Composite Leading Edge ??

    Looks really nice. Thanks

  4. #4
    Senior Member efwd's Avatar
    Join Date
    Jun 2015
    Location
    Yorba Linda, CA
    Posts
    2,823

    Default Re: LLE Kit (Laker Leading Edge) Composite Leading Edge ??

    Hi Brian
    I bought just about every upgrade available when I ordered my Kit. Although I like the smooth leading edge and almost dropped the coin for it, I keep seeing the photos of Ross' adventures across the "entire" continent down under. He doesn't have the LLE. If he's having that kind of fun without getting up off his wallet then I will too. I can buy a considerable amount of fuel for the 912iS for that money.
    Eddie

  5. #5
    Senior Member
    Join Date
    Dec 2012
    Location
    Mt Beauty, Australia
    Posts
    1,073

    Default Re: LLE Kit (Laker Leading Edge) Composite Leading Edge ??

    Hey Eddie - small correction - I DO have the LLE on mine.

    cheers

    r
    Ross
    Mt Beauty, Vic
    OZ
    Sold to Richard and Scott Taubman in OZ, 2019. Kitfox SS7,Rotax 912is Sport, Airmaster CSP 75" blades.
    Landcruiser and Cub off road camper (doesn't get any kudos on this forum!)

  6. #6

    Join Date
    May 2017
    Location
    Modesto CA
    Posts
    185

    Default Re: LLE Kit (Laker Leading Edge) Composite Leading Edge ??

    Quote Originally Posted by rosslr View Post
    Hey Eddie - small correction - I DO have the LLE on mine.

    cheers

    r
    Do you think it makes a difference? I looked at an S-5 yesterday that didn't have it, and as far as looks, I thought the wing looked fine without it. Do you think it's worth the extra $1000 in performance?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •