image.jpg
Any suggestions on fabricating a rotisserie that would screw into the rudder studs? I'm happy with the 2X4 setup on the firewall.
image.jpg
Any suggestions on fabricating a rotisserie that would screw into the rudder studs? I'm happy with the 2X4 setup on the firewall.
Mike Kahle
Jackson, MO
IV Classic 582
RV-12is building
Here is a Fuselage Rotisserie, that I saw looking at a web site on building Highlander. I would build it out of wood. I saw one out of wood somewhere on the Kitfox Forum, but I can’t find it. I was searching for “Rotisserie”.
This guy is a talented builder. He took his highlander and turned it into a SuperSTOL. No easy feat, a significant amount of welding on the fuselage was entailed, adding the landing gear structures.
Paul Zimmermann
LSRM-A
Garland, Texas
Tie down strap, 1/4 inch bolt, fender washer, hang it from the rafters.
Tom Jones
Classic 4 builder
Mine has to be mobile so I'm doing something like Kebo : His pics from his thread
Here's one I made out of bits and pieces I had laying around.
_________________________________
JohnB
Charlotte, MI
Kitfox 7-SS
Rotax 912ULS / Whirlwind Prop
Garmin G3X Touch
A harbor freight engine stand works really well, too.
For the tail, make a tongue that clamps to the tail spring mount and goes into the engine stand.