Tall Pilot

[SteveAllen]

I'm considering a series 7 but I was curious about how comfortable I'll be in the plane. I'm 6' 4" tall and weigh in about 225. So far in my research I haven't fit very well in many experimentals, RV's included.

Any one with experience to share?

Thank you.

[mobilemb]

Steve I have the same considerations as you. I am 6.4 215, my legs are 37 in inseam and sit normally. ( I have longer legs). Girls like it but sucks for kitplanes. I sat in a KF 7s last weekend. And surprisingly comfortably I might add. I should be able to sit for long periods without discomfort but I will have to modify the placement of the throttle more to the right of center, make sure I get completely full aft adjustments on the rudder pedals and install the brake cylinders with line out facing 90 degrees to the firewall vice toward the firewall to insure additional throw on rudder pedal adjustment. I will also have to add a little more padding on under the leg pads of the seat to insure better leg support. I also recommend the bubble windows. Otherwise I fit comfortably!!

Mike

[Paul Z]

Call Paul Leadabrand at Stick & Rudder, he's got to be at least 6' 1" or 6' 2".

[SkyPirate]

I have taken guys 6'4" 6'5" 230 240 lbs for rides in my model 5 ,,they fit well,..I don't have the adjustable pedals

[Esser]

I'm 6'3" but quite thin. For the most comfortable leg position and natural ankle angle, I actually moved my rudder pedals towards me about 1.5". I know it sounds backwards but it you think about it, your knees are already bent so at that point, it is about making sure that the angle your ankle to your foot makes is natural. With the base of the rudder pedals closer to me, I can have the top of the rudder pedals closer to the firewall which makes the pedals have an obtuse angle instead of a right angle.

I hope I didn't confuse you more. If you need more clarification let me know.

[inzersv]

I had a Murphy Rebel jocky sit in my SS7 the other day and he was blown away with how much room he had. He is 6'4" and about 235 lbs. It looked to me that he still had about 2" of head room. He used to fly a Model 4, so he is familiar with the kitfox.

[rocketman2tm]

I'm 6'4". I've been flying around in Stick and Rudder's airplane without any problems. One thing I would suggest though is to get the thinner seats. I was using the standard seats and clearing fine, but it gets a little tight with a headset on. Also I want to be able to add some thing for lumbar support.