Rotax 912 Fuel Pump Overpressure

[napierm]

Hello,

I have about 20 hours on one of the new style "Corona" fuel pumps.

Yesterday while returning home on a cross country the fuel pressure started drifting. 7, down to 4, up to 7, 8 ,9,10,8,7... All very slow. 10,12,11,13,...eventually I saw 20.

If the pressure went low I have an electric pump inline but nothing I can do about overpressure. The engine didn't miss a beat and the fuel flow meter stayed constant. I tried clearing the engine a few times without much change.

Of course I'm thinking instrumentation so before ordering anything I'll need to put another pressure meter on a T and run it on the ground to see. If it all holds steady at 7PSI like it has all along I'm not sure what to think.

Has anyone heard of a similar problem with the new pump? Or old one for that matter. I'll call Lockwood on Monday and ask the same.

Thanks in advance,

Mark Napier

[Dorsal]

Had a similar problem and it turned out to be instrumentation, good call to check that first.

[Av8r3400]

I have also heard of people needing to add a pressure regulator...

[Dave Holl]

I would have thought that if the higher fuel pressures were correct you would have had issues with rough running of the engine as the carb float needle valves would have been overpowered and cause the carbs to flood?

[mr bill]

What Dave said makes sense. If those pressures were real, I don't think the engine would run smoothly and normal.

[SWeidemann]

Isn't a fuel return line kit (over pressured fuel goes back into the header tank) a good solution to over pressure?

Skot