I have a Kitfox III which I didn't build myself. The elevator pushrod runs through a round support about half way back in the rear part of the fuselage. I have the plans and they call out for a"FBU 62" bushing; elevator control tube guide which I presume fits into the hole in the control tube guide back in the fuselage. Deb at Kitfox says they can provide the part.

I cant find a drawing in the plans that shows this bushing or how it installs. Im wondering if I have to cut open the fabric to install the bushing and how to go about getting the bushing on the pushrod tube and into the control tube guide.

Right now the pushrod tube goes through the control tube guide without this bushing.