Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 9 of 9

Thread: Kitfox Iv 912 (Miss Daisy) flying video

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Join Date
    Aug 2008
    Location
    Warrenton,Va
    Posts
    16

    Default Kitfox Iv 912 (Miss Daisy) flying video

    Hello to everyone. Sorry I have not posted in such a long time but I have been busy FLYING! Its been over 3 1/2 yrs flying Miss Daisy now and I can say I have loved every flight. I have flown to the upper part of Maine to the lower part of North Carolina( Including First flight airport) and everywhere in between. I have made alot good friends along the way and Look forward in making many more. Along the way I have been taken video footage of my flights and finally have started to put them together into videos. So here is the first one. Joe,

    Last edited by Joepthepilot; 10-08-2012 at 02:45 PM.

  2. #2
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: Kitfox Iv 912 (Miss Daisy) flying video

    Thanks for the flight, Joe. Beautiful bird you have.
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  3. #3
    ackselle's Avatar
    Join Date
    Oct 2010
    Location
    Winnipeg, MB
    Posts
    175

    Default Re: Kitfox Iv 912 (Miss Daisy) flying video

    Nicely done! Keep 'em comin'!
    Ackselle
    Kitfox IV 1200 Classic C-GIKV
    29" Airstreaks, 11" Matco Tailwheel
    ROTAX 912, Hoffman HO-V352F CS Prop

  4. #4
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: Kitfox Iv 912 (Miss Daisy) flying video

    Mine's pretty simple. I use the Contour camera and just wrapped a Velcro strap around the camera base and the strut where the strut attaches to the wing, with a little foam between the two. I can remove the camera for downloading and battery charging and leave the base on the strut. Download, format the stick, charge, reinstall on the base and go again. Of course,any times I then forget to turn the stupid camera on. Oh, well ...
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  5. #5
    ackselle's Avatar
    Join Date
    Oct 2010
    Location
    Winnipeg, MB
    Posts
    175

    Default Re: Kitfox Iv 912 (Miss Daisy) flying video

    Wannafly...... if you use a GoPro camers (see picture below), mounting is REAL simple. I've attached a few pictures. The GoPro take great stills and movies in HD format.
    Attached Images Attached Images
    Ackselle
    Kitfox IV 1200 Classic C-GIKV
    29" Airstreaks, 11" Matco Tailwheel
    ROTAX 912, Hoffman HO-V352F CS Prop

  6. #6
    Senior Member GWright6970's Avatar
    Join Date
    Jan 2011
    Location
    Vacaville, CA
    Posts
    359

    Default Re: Kitfox Iv 912 (Miss Daisy) flying video

    Nice job! I hope you post more!

  7. #7
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: Kitfox Iv 912 (Miss Daisy) flying video

    Ackselle,
    How do you hold the bases on the locations shown in your photos?
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •