Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 28

Thread: Razor Back Option

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 02-27-2021, 11:46 AM #7
    bbs428
    bbs428 is offline
    Senior Member bbs428's Avatar
    Join Date
    Jan 2015
    Location
    SW Missouri
    Posts
    665

    Default Re: Razor Back Option

    I made mine from an old, straight, knot free, 1" pine board and used the router to round off one side.
    Worked out great. Attached the fore and aft ends, then pulled it down until it looked right.
    Made some brackets from aluminum, pine, aero-poxy and some pop rivets.
    Turned out strong and light. Covering proved to be no problem.
    Attached Images Attached Images
    "Somebody said that carrier pilots were the best in the world, and they must be or there wouldn't be any of them left alive." Ernie Pyle

    Brett Butler
    Flying: N46KF, 1998 Model 5 Outback, 912ul 110hp, G3x with 2 axis a/p, Beringer wheels & brakes, SS7 firewall forward, NR prop, Custom paint
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules