Is the plastic bushing used in the rudder pedal pivots (the pedal mount pivots themselves, not the torque tubes) supposed to move inside the weldment, or is the AN3 pedal pivot bolt supposed to move inside the plastic bushing? The manual doesn't specify.

Still trying to get the friction out of my rudder pedal assembly. I confess, I'm not impressed with the use of plastic bushings. Won't they wear over time? I had things moving pretty easily and then bolted them into the plane: the pax side stayed fairly loose but the pilot's side tightened up. I'll need to fix that somehow.

FWIW, in experimenting with various lubricants I've found that indeed LPS2 seems to be the lube of choice for all these pivots where plastic rides on metal. It'll be easy to wick more in there down the road too. White Lithium grease seems to dry out and doesn't feel as slippery.