Three small screws release the glare shield. The two bolts going thru the rods go into nut plates and they are out in seconds. Then the three bolts thru the bottom of the panel are removed and the panel is free to tilt. Oh, I just remembered, you asked about the glove box - it is a unit from Van's. A long story of multiple brain farts. I shortened it a bit and now realize I didn't need to but am glad I did. (It is still plenty deep in its current configuration.) I used screws and nut plates so it can easily be removed from the panel but it doesn't need to be removable.
Glove box installed small.jpg