i have a kf 1 that has the original rudder pedals and durring a pre flight inspection i found the touque was very badly cracked . has any one had experience with this and what is the fix thanks LOOPED
i have a kf 1 that has the original rudder pedals and durring a pre flight inspection i found the touque was very badly cracked . has any one had experience with this and what is the fix thanks LOOPED
Obviously, the contact info is outdated. Service Letters and Bulletins can be found in the 'Technical FAQs' section at http://www.kitfoxaircraft.com
-Aeropro CZ Aerotrek A240 Tri-Gear SLSA 912uls
-Airdale Avid+ on CZAW Amphibs 'FatAvid Floater' (building)
-Kitfox 4-1200 TD 912ul (sold)
-Kitfox Model III TD 582 (R.I.P.)
-Avid Flyer Mk-IV TD (sold)
thanks for the help, this fix appears to straight forward, ps any early foxes out there make shure to inspect your torque tubes if one of these fails durring flight things would get exciting in a big hurry, looped
Here's a picture of the failure.
Generator 005.JPG