Geek's STi Build

[Geek]

Installed the Dzus fasteners between the upper and lower cowling as well as the ones between the upper and boot cowls. Due to the fit between the lower cowling, the boot cowling and the firewall foot wells, I needed to order some longer fasteners so am awaiting parts on that. I also cut the access hole for the exhaust pipe stinger and have the desired 1/2 inch clearance around it. Finished plumbing in the "Thermobob" thermostat into my cooling with a 180 degree thermostat installed. Should help get my engine temps up when warming up and keeping them stable when flying in colder weather.