The cutout on my series 6 windshield seems to be "dented" on the left side at the top of the forward door frame. The right side in this area seems perfectly aligned but the "dent" is causing a tight fit across the top of the door frames. It's so tight I don't dare stretch it too much more for fear of cracking the acrylic somewhere in this key area. Is it possible to heat up the acrylic to reshape it to a better fit and relieve the stretching tension across the door frame?

IMG_7939.jpgIMG_7940.jpg

The left picture shows the "dent" on the left side and the right picture shows the "normal" right side for comparison.