I am ready to attach the stringers and test fit one side in place. I varied from the order of the instructions, and notched the stringer at the aft end and test wired it into place. It seemed easier to do it that way as opposed to securing the stringer to the middle standoffs and then deal with the aft end. The problem that I ran into is that the stringer contacts the aft-most vertical member just in front of the spot where it is supposed to be secured. It seems odd that the stringer would purposely interfere with the vertical member. I could use anti-chaffe tape, but that doesn't seem right. I looked at earlier posts and believe that I am attaching the stringer to the correct vertical member and it seems to agree with the instructions.

I would appreciate any advice/help.

Thanks

Fred

Building
Probably 914
Probably G3X