How difficult is it and what's involved in replacing a 912ULS to a 915IS in a 7SS. Any idea of the costs? The 912ULS has about 50 hours on it - any idea what price I could sell it for?
Thx
How difficult is it and what's involved in replacing a 912ULS to a 915IS in a 7SS. Any idea of the costs? The 912ULS has about 50 hours on it - any idea what price I could sell it for?
Thx
Value of the ULS depends on how old it is, how long was it sitting. You could price out a new one and compare. If it is a few years old and has not been sitting may be worth 50-75% of new to someone. The lack of warranty would be a factor to some also, along with what the books look like for it.
Swapping to an iS would be a little bit of work. Different setup with the iS parts - ECU, fuel, fuse box. I think not terribly hard but not a direct bolt in. You could search some builds on here that have a 912iS, similar in terms of ECU, fuse box, etc. Then look at yours and compare.
Flying SS7, G3X, 912iS
https://mountainfoxbuild.wordpress.com/
If you don't mind me asking, what is the reason to consider switching? This can be replied to my message if you'd like.
Understood. My buddy and I are building an S7. We are flat landers but value extra power to get airborne quicker so we are planning on the 915.
Part of the price of admission with a 915 swap is the prop. The MT prop is about $18,000.
Having more horsepower than you need (a subjective term for sure) is always nice, no question about that. However, just so that people don't get the wrong idea about a 912 UL or ULS (80 or 100 HP) in a Kitfox, quite a few of us in Colorado have those engines. My home field, where there are at least 4 of us, is at an elevation of about 5700' msl. The Rocky Mountains run right through our state, and according to the Colorado Geological Survey, we have 58 mountains over 14,000 feet. It also can get quite hot in the summer... I suspect a bit warmer than it does in Canada. Anyway, we regularly travel in and over the mountains. An 80 hp Mod. IV or a 100 hp S7 is very capable of safely flying here without a turbo. My friend Stan has landed at every public airport (and many others) in the state with his 80 hp Mod. IV Speedster. Just sayin'.
John Evens
Arvada, CO
Kitfox SS7 N27JE
EAA Lifetime
Chap. 43 honorary Lifetime
Richard at AJO (Corona, CA) Kitfox 7 installing 915is from 912. Let me just say do not remove your flyable engine until you have every part you need to convert to the 915 as parts are promised but not delivered. You can catch his first YouTube install of 915. Also mind you the cowling will need to be extended do to the extra 4” added to mount and prop hub or better yet go with the carbon fiber cowl to offset the extra 40lbs the engine and accessories add. Eddie I think you met Richard in Corona, he had monster shocks and 29” tires.
George
www.youtube.com/watch?v=bPOi7SpgNP4
Kitfox 7 flying
Seems like this might be a better candidate for an Edge engine...