-
If I were gonna have an enclosed trailer
for a mod. 4 or 5 with Grove gear and 26" tires, how high would the opening have to be on the trailer,to get the airplane in?
Thanks again Gary
-
Senior Member
Re: If I were gonna have an enclosed trailer
a tricylce gear with stock gear is 8 foot tall,..a tail dragger is 5'8"? I think ..with stock gear,..so if you got a trailer that a tricycle gear will fit into ,..you'd be covered,.unless your talkiong about a tricycle with tall tires
what ever the tire size is over the stock tire,..split the hieght dimension and subtract 1/2 the original stock tire height from 1/2 the new tire height ,..this will give you your new height dimension plus 1/2 the stock height .
Chase
-
Re: If I were gonna have an enclosed trailer
Hey Chase
Thanks for the response. It would be a taildragger. I am assuming on a taildragger, with a 3 bladed prop., the prop. would be the tallest point.
Does the Grove gear put things at the same height as the stock gear?
And your # would be with the prop. turned for maximm benefit??
Gary
-
Senior Member
Re: If I were gonna have an enclosed trailer
I can't tell you exactly the height difference ,.I can only give you a close guestimation,..what will matter is the tire you choose the ammount of air pressure you choose to put in the tire ,. prop diameter etc..too many variables to give you an exact measurement with out actually doing what your proposing and measuring it,..
I'd say it would be safe to say it's around 6.5 foot to 7 foot unless your swinging a 96 inch prop
Chase
-
Re: If I were gonna have an enclosed trailer
Hey Chase
Thanks. Maybe someone with that setup will chime in w/some approx. numbers.
Have a good evening Gary
-
Senior Member
Re: If I were gonna have an enclosed trailer
no problem Gary ,..you were talking ab out a 3 blade prop right?
Chase
-
Re: If I were gonna have an enclosed trailer
Tom
Thanks for getting that info for me. Hope it warms up for you soon.
We are 0 right now in Durango. With a high of 20 for today. But the sun will be out, and it will be a great day to fly.
Have a great day in Wa. Gary
-
Re: If I were gonna have an enclosed trailer
Interesting about the Grove gear. I would have expected it to be the taller gear. I guess if you were to order it from Grove, they could make it any height you wanted.
Gary
-
Senior Member
Re: If I were gonna have an enclosed trailer
Gary, I can't answer your question specifically but can give you some numbers that are as close as I can measure while shivering in my cold shop this morning.
Classic 4 with 18 inch tires and stock tube gear. 72 inch two blade prop positioned at 60 degrees from straight up to simulate a 3 blade height is 73 and 1/2 inches.
For what its worth the model 4's I have seen with the grove gear in the tail wheel position sit lower than the stock gear does.
Tom
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules