I have a TRIG gps and was thinking of mounting it on top of windshield.
I would have to drill holes to mount and for antena cable.
any thought. It is GPS reciever.
joe
I have a TRIG gps and was thinking of mounting it on top of windshield.
I would have to drill holes to mount and for antena cable.
any thought. It is GPS reciever.
joe
Last edited by favjo; 01-16-2020 at 09:18 AM.
When you say GPS are you referring to the GPS receiver, GPS antenna or the GPS unit?
If you are referring to the antenna you can make a tray underneath the dash and installed it 100% concealed and not have to drill any holes in the dash or windshield as you are suggesting.
Dave
KitFox 6 Taildragger
912 ULS
Whirlwind 70” Prop
Garmin G3x
All around nice guy
5FB3249F-A143-4811-9C44-14F362007BC9.jpg
As Dave described:
Aluminum tray bonded to instrument panel support tubes under glare shield for gps antennas.
Works great as long as glare shield is NOT made of carbon fiber or aluminum.
Both the white and little black antennas in the far right hand tray are for gps’.
DesertFox4
Admin.
7 Super Sport912 ULS Tri-gear
I saw DF4's installation and copied it. Works fine there.
Eddie Forward
Flying
SS7, 912iS, Garmin G3X