I've attached my first inspection ring on the underside of the left wing near the pitot tube connections. I'm wondering how close to cut out the inner diameter of the fabric next to the embedded plastic ring. Is there some small distance we should normally allow so that some of the fabric below the plastic ring still contacts the patch fabric above the ring? Or do we just trust the glue joint on the embedded plastic ring and cut the fabric back right next to the plastic ring's inner diameter? Because I'm cautious when trying something new for the first time I've cut only a portion of the inner fabric away until I get a consensus from those with more experience. Thanks ahead of time for any of you sharing your experience.

IMG_7137.jpg