Replacing the bungee gear with the cabane system and curious if any of you could shed light on the recommendation to have a 4 degree angle inward cant on the wheel. Thanks!
Replacing the bungee gear with the cabane system and curious if any of you could shed light on the recommendation to have a 4 degree angle inward cant on the wheel. Thanks!
Are you talking camber or toe?
Toe should be 0 degrees. Camber will change on loading... In flight it will be out on the top, should be close to neutral when rolling on the ground.
Ralph
Ralph
Kitfox 3 flying
Building Kitfox SS7 (RockFox)
915iS Engine
Building Partner Victor V
Thanks for your response. Perhaps the 4 degree camber setting is suggested to compensate when there is no load on the gear.