-
Senior Member
Banjo bolt
I am looking for a confirmation on the torque value of the banjo bolt oil fitting on the bottom of the rotax 100uls is 105 in lbs.
Thanks
-
Re: Banjo bolt
Just got done doing this on mine and according to the 912 ULS installation manual it's 22 foot pounds or 264 inch pounds.
Image 6-7-21 at 8.53 PM.jpg
-
Senior Member
Re: Banjo bolt
I was looking in the heavy maintenance manual and thought I found 105 inch pounds. I will need to check this again, the difference between my find and yours is a lot. Did you find this in the Kitfox manual or did you get a book with your engine that gives you this value?
Thanks for the information.
-
Re: Banjo bolt
https://www.rotax-owner.com/pdf/IM_9...ies_Ed3_R0.pdf
This is installation manual for the 912 ULS. When I got my engine, John with Kitfox recommend that I download it and use for reference.
Chapter 79 covers the lubrication system.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules