I also used balsa, but if you choose to use the foam, I have heard that others gave it a good final coating of Hysol epoxy well pressed into the foam pores and got good results. I would certainly not leave the soft foam bare.
I also used balsa, but if you choose to use the foam, I have heard that others gave it a good final coating of Hysol epoxy well pressed into the foam pores and got good results. I would certainly not leave the soft foam bare.
Jim Ott
Portland, OR
Kitfox SS7 flying
Rotax 912ULS
Thank you all for the info. I suspected as much.
I'm assuming a layer of fiberglass would achieve the same result? That was my plan. - Mark
Last edited by markyharris; 09-20-2020 at 07:44 PM.