Will do, I’ll put one together next time I’m out.
All the best, David
Will do, I’ll put one together next time I’m out.
All the best, David
Hi guys, video of folding the wings on the water, all the best, David
https://youtu.be/NmAhhWlxYWc
Me too. Very cool!
SS7 O-200 Whirlwind
Very stable on those floats even with wings folded and walking aft of C.O.B.
You’ve got a controlled and thorough procedure.
First thought though was , “don’t drop those front spar pins”! Splash!
Might want to order a couple spare just in case along with a couple backup safety clips.😉
Tech question: my impression after looking over Zenair’s site is that the float to fuselage mounting brackets are provided by the customer. Question is, did you have to manufacture your fuselage attachment brackets or does Zenair now make them available for the Kitfox later models? Also, when you make adjustments to your angle of incidence, where do you make that change? Hopefully you don’t have to make new mounting brackets each time.
Thanks for the videos and your feedback David.
DesertFox4
Admin.
7 Super Sport912 ULS Tri-gear
Hello guys! My first post/comment on the forum.. I'm traveling to NH this weekend to become part of the KF family and pick up a Model IV-1200. It is on grove gear and comes with a set of Avid Amphibs. I'm breaking ground on an open front hangar and would like someone to tell me what the overall height of the KF will be sitting on the amphibs. I don't want the hangar to be excessively tall, just enough to have comfortable clearance on the floats. Any insight is greatly appreciated.
Hello River fox,
I have a KF7 SS with Zenair 1450 straight floats, tail height is around 120" with the floats on the ground. Im sure the IV is different, it will also make a difference how they are mounted. You may want to start a new thread under general discussion. There are people here that have IV's with floats. Welcome to the KF family! All the best, David
New thread created!
Thanks