They look great! Your idea of heat shrink over the control stick tubing is a fantastic idea.
Sent from my iPhone using Tapatalk
They look great! Your idea of heat shrink over the control stick tubing is a fantastic idea.
Sent from my iPhone using Tapatalk
Did you have to sand the adapter or grip to make then fit? It look like I need to sand some off the adapters.
They should slide right into the grip locking rings. Note that they do not go into the control stick tube. There may be a slight edge on the bottom that could be sanded if needed, but nothing too aggressive should be required. Send some pics and maybe I can assist further.
Sent from my iPhone using Tapatalk
I dont have the control stick tube yet, just the ptt and grips. This is as far as I can get it in easily. Without sanding or filing.
Sent from my SM-N960U using Tapatalk
I had to sand down the connector, the clip part
See if it will install without the wiring first to see if thats your problem
Just trying to get a few minor things while I wait 18 months for my kit.
Sent from my SM-N960U using Tapatalk
Wasn't the wiring, hand to slightlt file the inside of the grips, and debur the switch adapter. We just moved took a bit to find my files.
Glad it worked out for you. What make and model grips did you purchase? I am more than happy to modify and send you new 3d printed parts at no charge. I have only tested these with LizardSkins, so other brands might have slightly difference physical dimensions.
Good luck on the kit and I look forward to seeing some pics of them installed!
Sent from my iPhone using Tapatalk
I bought the spank grom grips. And I have 2 extsr ptt assemblys I misread the ebay site and ordered 2, missed where it says they come as a set of 2
Sent from my SM-N960U using Tapatalk
Like a glove
Dave
KitFox 6 Taildragger
912 ULS
Whirlwind 70” Prop
Garmin G3x
All around nice guy