Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23

Thread: Installing the IO-240

  1. #21
    Senior Member
    Join Date
    Jun 2008
    Location
    wales,ny
    Posts
    710

    Default Re: Installing the IO-240

    A quick call to Kitfox would confirm what you are asking here, but I would suspect that they kept the necessary tooling and cowling molds for the IO-240 firewall forward that Skystar(the previous owners)provided when I built my Series 5. Bruce N199CL

  2. #22

    Join Date
    Nov 2019
    Location
    Melbourne, Australia
    Posts
    1

    Default Re: Installing the IO-240

    Hello all,
    I know this thread has been inactive for sometime. I was wondering what torque setting was used on the propeller extension to engine flange?

    thanks in advance Pete

  3. #23
    Senior Member PapuaPilot's Avatar
    Join Date
    Nov 2013
    Location
    Nampa, Idaho
    Posts
    1,225

    Default Re: Installing the IO-240

    I have a Saber brand extension on my IO-240. Here is a link to their FAQs that shows the torque.
    http://www.sabermfg.com/faq.htm
    Phil Nelson
    A&P-IA, Maintenance Instructor
    KF 5 Outback, Cont. IO-240
    Flying since 2016

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •