Okay, I am stumped. Kitfox just sent me 3 of the 37 degree flared elbows for the oil lines. The instruction manual doesn’t show where the three fittings go (there is a picture, but it only shows one of them). There are two ports on the oil tank, one on the oil pump, and one at the bottom of the crankcase. I just spoke with Heather and she said they always ship 3 with the kits. So, considering that there are 4 connections to be made, where do the three elbows go? Is the remaining fitting a strait fitting with a 37 degree flare?

Also, does anyone have any pictures and advice on the best routing for the oil lines? I will upload pictures when I get out to the garage and snap a few photos.