Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: Series 5 wing stringer questions

  1. #1
    Senior Member Maverick's Avatar
    Join Date
    Mar 2017
    Location
    Phoenix
    Posts
    295

    Default Series 5 wing stringer questions

    I am reading the instruction on-line manual related to installing the stringers. The original manual does not specify how much of the stringer to extend inboard of rib #3. The online manual for the 7 says to leave about six inches inboard.

    My question is, does anybody have a suggestion on how much to leave inboard of rib #3? I was going to cut it so that about 3/8 of an inch stuck out past the rib web.

  2. #2
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,960

    Default Re: Series 5 wing stringer questions

    It`has to clear the fuel tank. Just wait until the tank is ready to install, then you will know exactly hou much can stick out.
    Jim Ott
    Portland, OR
    Kitfox SS7 flying
    Rotax 912ULS

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •