Senior Member
Instrument Panel Template
I think my next project will be a new instrument panel. Perhaps in Carbon Fiber.
I've added a few things to the existing panel and it just needs some serious re-arranging.
So, would any of you guys that have kits be willing to trace out the outline of the panel on a piece of paper and mail it to me???
I'll pay for postage etc. It would be a big help. Email me at Stinson97502@gmail.com if you can help.
Thanks
Rodney
Re: Instrument Panel Template
So, you want a tracing of a blank panel, uncut from the factory?
What model kitfox do you have?
Roger
Re: Instrument Panel Template
Rodney
I am building a model 7. I can supply an uncut template from the factory if this is what you need.
Senior Member
Re: Instrument Panel Template
I too have a model 7. Just an outline of an uncut panel is exactly what I need
My address is. 1367 N 4270 Rd. Hugo. Ok. 74735
I will reimburse for postage.
Thanks
Rodney
Senior Member
Re: Instrument Panel Template
Rodney - I don't know if this will help but you can take the attached file to you local Office Depot or Staples and have them print it out full size (about $5) and you'll have two outlines to use.
Attached Files
Senior Member
Re: Instrument Panel Template
Opps, here's one in black.
Attached Files
Re: Instrument Panel Template
Rodney
This is what comes in the kit. It is not cut, just marked for the outside shape. I’m not sure if this will help but I can send you a template of this if it will help.
A02E83D7-9F05-42BD-886D-8EA702AEC75A.jpg 7053C39E-6375-4C96-9ED4-7BD3DA287194.jpg
Re: Instrument Panel Template
I have a cad file if needed PM me or provide email
David Kelm
7SS 912iS Big Bore
Re: Instrument Panel Template
Are you still able to send the CAD file? Willing to pay as well, just wondering.
-Thanks
Senior Member
Re: Instrument Panel Template
Earlier today I read the "trick" (I can't remember who to give credit too - but you know who your are ) of zipping file(s) if the source file isn't normally acceptable. So, this is a test to see if I can attach a CAD file of the instrument panel by zipping it. If it is there, then it worked. blank-panel.zip
Posting Permissions
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
Forum Rules