Instrument Panel Template

[Rodney]

I think my next project will be a new instrument panel. Perhaps in Carbon Fiber.

I've added a few things to the existing panel and it just needs some serious re-arranging.

So, would any of you guys that have kits be willing to trace out the outline of the panel on a piece of paper and mail it to me???

I'll pay for postage etc. It would be a big help. Email me at Stinson97502@gmail.com if you can help.

Thanks
Rodney

[rogerh12]

So, you want a tracing of a blank panel, uncut from the factory?
What model kitfox do you have?
Roger

[Frontier Fox]

Rodney
I am building a model 7. I can supply an uncut template from the factory if this is what you need.

[Rodney]

I too have a model 7. Just an outline of an uncut panel is exactly what I need

My address is. 1367 N 4270 Rd. Hugo. Ok. 74735

I will reimburse for postage.

Thanks
Rodney

[Delta Whisky]

Rodney - I don't know if this will help but you can take the attached file to you local Office Depot or Staples and have them print it out full size (about $5) and you'll have two outlines to use.

[Delta Whisky]

Opps, here's one in black.

[Maverick]

I am looking to re-do my panel also. I opened the Zip file and I was able to get to the CAD file however, I do not have an application to open the file with. Is there a good easy to use CAD application out there that I could use to open the file with. Further, could it be used to add the cut-outs that I want for the various items to the file so that I could then take the file to a shop to have the panel laser cut?
Fred

[alexM]

You have a EAA member number in your signature, so you can download a fully functional version of Solidworks for free. I've spent my entire working life doing CAD and "speak" many languages. I can honestly say Solidworks is hard to beat. While it has a learning curve if you want to become an expert, importing a panel file and poking some holes in it is a great place to jump in. Start with some of the built in tutorials and you'll know when you're ready to pull in the panel.

Dynon HDX 7 two screens.jpg

[Frontier Fox]

Rodney
This is what comes in the kit. It is not cut, just marked for the outside shape. I’m not sure if this will help but I can send you a template of this if it will help.
A02E83D7-9F05-42BD-886D-8EA702AEC75A.jpg7053C39E-6375-4C96-9ED4-7BD3DA287194.jpg

[dcsfoto]

I have a cad file if needed PM me or provide email

David Kelm
7SS 912iS Big Bore