Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 5 of 5 FirstFirst 12345
Results 41 to 44 of 44

Thread: MeSteve’s Build Log

  1. #41
    Senior Member efwd's Avatar
    Join Date
    Jun 2015
    Location
    Yorba Linda, CA
    Posts
    2,817

    Default Re: MeSteve’s Build Log

    I'm with John. Maybe, if you haven't proceeded, you should post a Pic.
    Eddie Forward
    Flying
    SS7, 912iS, Garmin G3X

  2. #42

    Join Date
    Oct 2018
    Location
    STL
    Posts
    57

    Default Re: MeSteve’s Build Log

    Sorry its been a while since I asked...

    So, here's what I ended up doing... I emailed the factory and they said they cut a slit in the bottom threshold piece and taper it in towards the fabric attach angle, so that's what I did.

    Kitfox's photo
    IMG_9068.jpg


    My photo
    Jcw3GWzgRJWFrl9k+aAvkg.jpg
    Steve
    SS7 in work

  3. #43
    Senior Member bbs428's Avatar
    Join Date
    Jan 2015
    Location
    SW Missouri
    Posts
    649

    Default Re: MeSteve’s Build Log

    Working around the doors was not my favorite time. Had to go through a lot of older posts to wrap my head around the joggles. J. McBeans pic's and notes helped me out the most.

    Looking Good!
    Somebody said that carrier pilots were the best in the world, and they must be or there wouldn't be any of them left alive. — Ernie Pyle

    Brett Butler
    Flying: 1998 Model 5 Outback, 912ul Zipper 110hp, G3x avionics, ss7 upgrades

  4. #44

    Join Date
    Oct 2018
    Location
    STL
    Posts
    57

    Default Re: MeSteve’s Build Log

    Thank you.

    i was looking at getting the dual pin latches fabricated and attached to the door frame, but guess too needs to wait until after paint as there needs to be some shimming involved. I was really hoping the doors would be one of those “show” steps after all of the door frame work, but guess that ain’t happening...
    Steve
    SS7 in work

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •