jf build

[Jfquebec]

i everybody...there my kitfox classic 4 project ,i receive my permit to start my project.so there my pic,,,,

i start my panel


making handle


rudder pedal


control look


lift strut installation for rigging

[Jfquebec]

the first wing ,we hold the aircraft with anvil..


jury strut,i not sure of this one get out of fabric????


the fuel placard kit..


gluing the reinforcement bracket

[Jfquebec]

my test pilots..


so there were i am..today i finish to install all the lift stut bracket,spar reinforcement and jury strut bracket,,104 hole and rivets...not bad...

next my and my friend Dave re put the wing for installation of the but ribs.after that the gas tank...see you guy's

[Esser]

Looks good JF. Also nice work shop. I want to tin the in side of mine some day.

[Jfquebec]

For sure Josh ,,

[chefwarthog]

C'est bien parti, mon J.F..... nice center console..... go on and send us more pictures.....

[Jerrytex]

Check out this link about the jury strut. I ended up cutting the jury strut a little and extended the bracket that attaches to the spar. This way the bolt was below the fabric. Worked out with no problems.

http://www.teamkitfox.com/Forums/sho...ght=jury+strut

[Jfquebec]

Yes Jerry ,i read the disscusion about your problem..do you have a pic of what it's look,i cant figure how i can put the two bracket vertical??? The first one is strait vertical on rear spar,but the second one arrived were it arrived?? I cant bend the jury strut %€£¥%#%*?,"....

Jf

[Jerrytex]

Sorry, I don't have a pic. The bracket was already mounted on mine. I used a piece of stainless steel plate and added it to the bracket down through the fabric. Maybe you could fabricate new longer brackets?

[Jfquebec]

Jerry i check if it's fit with more longer bracket when i put the wing back to the aircraft...

Now i fit the false ribs under the wing were the lift strut bracket are and he have a other problem ,,,,the hole will be in fabric to, maybe it is better to dont put any false ribs in this place.???
there a pic..