jf build

[Jerrytex]

Check out this link about the jury strut. I ended up cutting the jury strut a little and extended the bracket that attaches to the spar. This way the bolt was below the fabric. Worked out with no problems.

http://www.teamkitfox.com/Forums/sho...ght=jury+strut

[Jfquebec]

Yes Jerry ,i read the disscusion about your problem..do you have a pic of what it's look,i cant figure how i can put the two bracket vertical??? The first one is strait vertical on rear spar,but the second one arrived were it arrived?? I cant bend the jury strut %€£¥%#%*?,"....

Jf

[Jerrytex]

Sorry, I don't have a pic. The bracket was already mounted on mine. I used a piece of stainless steel plate and added it to the bracket down through the fabric. Maybe you could fabricate new longer brackets?

[Jfquebec]

Jerry i check if it's fit with more longer bracket when i put the wing back to the aircraft...

Now i fit the false ribs under the wing were the lift strut bracket are and he have a other problem ,,,,the hole will be in fabric to, maybe it is better to dont put any false ribs in this place.???
there a pic..

[Jerrytex]

The bolt hole where the lift strut attaches on mine is right at the level of the fabric similar to yours. The fabric is pushed up a little around the nut. Maybe someone else can chime in with more info or possibly post a pic.

[Jfquebec]

last night i gluing the push-pull tube in place the pitot tube and some back plate for airlerons bracket...







and there a video of the first aircraft (172 skyhawk) to land on my own grass strip..i work 3 year's on that and it's not finish wet..
http://www.youtube.com/watch?v=mjEN0Lr5Pwc

[Jfquebec]

somebody have instruction how to install that ,,i have nothing i my book ,only for little back plate(40 piece)

thank's