hi guy's here in Québec -26 this morning....brrrr...it cold..
but the kitfox is in the shop ...
here i am with the project,all is covering ,now i working on butt rib's..i stitch a plexiglass on fabric and try to make my best to cover that hardy place..
and now i have hard time with the radiator scoop...i install the new aluminum radiator and it look more bigger i think than the copper monr..so the scoop dont fit on... do you guy's have this problem with new alu radiator on kitfox 4
25395982_1567607646629204_9216348370809779279_n.jpg
radiator scoop
25289306_1567614879961814_2293384478869855021_n.jpg
butt rib's with window
24993423_1567607619962540_8940896959709106832_n.jpg
the famous new radiator
for this i find the right location ..the bracket right on tubing..i mark all hole and made a hole with soldering pen...i drill in floorboard...and install the bolt with bushing between floorboard and the rad...ho..and i put an rubber between rad and fabric...
IMG_2347.jpg
There is the modification on radiator cowling
IMG_2354.jpg
Three coat of poly spray on fuselage and landing gear
IMG_2249.jpg
And there is my paint sheme
That is going to look so cooool!
- Gary
S7 SuperSport Tri-gear
w/Rotax 912, Oratex, Dynon