jf build

[Jfquebec]

now i working on lot of thing..but i finish nothing..lol...i need to order some stuff...
so ...i make an aluminum plate 3/16'' 9 pound without holes.....now with hole's 5.5 lbs


100_1113.jpg

i install two angle to hold all that in place...and i put two other one at front...

100_1144.jpg

and i install one flaperon...100_1141.jpg
and batterie box....not finish yet
100_1145.jpg

[rdooley79]

Very nice build photos!
You will have an awesome plane with the quality of work you're doing.

The chrome and wood sticks will really set off the finish of the cockpit.

[Jfquebec]

hi....an little update of my work on plane...i making an modification on my elevator to install an trim tab whit an push pull cable like Rans trim kit...so i cut the tubbing ...re weld,cut and adjust the wood ribs...making an aluminum piece for backing the hinge,,making an trim tab who fit corectly in rib's ...after i order an push pull cable with alls fitting...and i desing and building an trim wheel system who gone go later in center consol..you can see the hole were the trim wheel will go later...and i install an tube in stab to routing the push pull cable after covering

[ATTACH][/ATTACH]


002.jpg
[ATTACH]IMG_0693[1].jpg[/ATTACH]
IMG_0692[1].jpg
IMG_0699[1].jpg

[Av8r3400]

Very nice looking modification, JF.

[Northof49]

nice job on the build JF. Your making good progress.
Mike

[bbs428]

Heya JF,

Read through your entire build to date. I liked your photos and descriptions of the tasks. Nice work done.

I will be following along. All the best,

Brett

[Jfquebec]

Thank's guy's ....i take my time ..it's not a rush..in first,i want the plane like i want..and thank's for your sugestion and your comments

[Jfquebec]

hi...there is my new progress...i started to covered the elevator...IMG_1431.jpg

at first..i dont find it easy..but with my friend help...im ok now..
i haved hard time to curve the tape around the curve...but after wathing eaa video...the girl use a carboard to put out wrinkcle and it work realy well....that is the final product after 2 coat of poly-brush...with the brush..

[Jfquebec]

now i working on the wing..like sy...i scotchbright everuthing and i clean all the wing cleaner from poly-fiber and a tak rag from boeing
after i put two coat of poly-brush everywere and i sart to cement the fabric to the wing..(p-110 2.4oz)
IMG_1437.jpg

[Jfquebec]

after i heat to 250f...and i smooth all cement place...and let's go for the top wing..IMG_1384.jpg