Nice Job Scott. They look great.
Eddie
Nice Job Scott. They look great.
Eddie
Looks great Scott. I'm anxious to see them up close in person.
Jim Ott
Portland, OR
Kitfox SS7 flying
Rotax 912ULS
Looks good. Could you describe a little on what you did to blend them together and how they are held in place.
I used Tap Plastics epoxy resin with micro balloons or flox at various amounts to thicken it up to attach the farings. With the right combination of resin and flox/micro ballons it makes the resin sand able. I painted with polyfiber primer(ep-420) then Aerothane paint. You could also use Hysol to attach along with polyfiber super fill to smooth it out.
Scott
Scott Noble
Kitfox SS7
I decided to upgrade my main grove gear to the Kitfox Monster gear. Last summer I installed the T3 tailwheel and I could immediately tell the benefits of having shocks on airplanes. I would estimate the T3 shock/spring reduced the fuselage impact by 2/3rds. I want to make my plane last so I'm installing monster shocks/kitdox Gear. In addition to the shocks the gear will make the plane sit over 4" taller giving a better AOA and more under wing shade..
20180607_114529.jpg
Flying home from Homedale with the gear legs on top of my camping gear Thursday.
20180609_191143.jpg
Monster Shocks
20180610_144713.jpg
Installed the fairings, covered and sprayed the gear legs up through silver. Waiting 4 days for the polyspray to off gas to spray Aerothane. It took one day to get to this point.
I know I'll loose a little cruise speed but hope the gains outweigh the loss in speed. I'll report the weight and performance changes when I get it done.
Scott Noble
Kitfox SS7
Nice Scott. Looking forward to hearing the report. You going to run 26”s?
------------------
Josh Esser
Flying SS7
Rotax 914iS
AirMaster Prop
Edmonton, AB, CWL3
I'll be ordering 29's Josh. I have 886 hours on my 26's. It's a good time to upgrade before I have to. 29's on the factory STI looks just awesome. The factory STI with the 915 is some real competition for the other kits out there. Not to mention you can build 2 for the price of a Carbon cub build and have money left over.
Scott Noble
Kitfox SS7
I think I’m going straight to the 29”s. Going to order them this week I think. Still reeling from sticker shock!
------------------
Josh Esser
Flying SS7
Rotax 914iS
AirMaster Prop
Edmonton, AB, CWL3
Just can't beat the feel of Airstreaks!
Scott Noble
Kitfox SS7
20180620_154140.jpg
Monster gear installed and I took it out for a short test flight. The installation was straight forward. You just need a solid way to lift your plane about 8" more than the Grove spring gear. The weight difference is 5 lbs. The gear raises the plane 5.5" at the front gear attach. It is supposed to settle a little more. I really like the look and feel of the gear. In my opinion the shocks are more than worth the weight and speed penalty. I'll get a better feel for the speed penalty this week.
Scott Noble
Kitfox SS7