Congrats on the kit Scott!
Hey, the other kit in the Partain trailer was my kit. I'm hoping to see it here in Michigan this week.
Have fun on the build.
Congrats on the kit Scott!
Hey, the other kit in the Partain trailer was my kit. I'm hoping to see it here in Michigan this week.
Have fun on the build.
_________________________________
JohnB
Charlotte, MI
Kitfox 7-SS
Rotax 912ULS / Whirlwind Prop
Garmin G3X Touch
Welcome to the club Scott. You're just down the hill from me so I can keep up with your build in person. However, a build log on this forum would be good.
Jim
Took 6 hours to do the inventory yesterday. Only a couple of parts to go.
I agree with Esser. I started to hang mine on the wall also and realized that most everything is boxed by section. It was much easier to look in one box than chase them on the wall.
Stan Inzer
912 ULS
Dynon Skyview 10"
N599KF
I guess what I'm thinking is that a 125 AN3-4a bolts in one container makes more sense than 25 bags containing different quantity of same. And cheaper too.
There is an issue with those who buy just the wing sections and then the fuselage, etc.
Ok, I'll shut up. Have had my say about how to make the product better.
Last edited by MotReklaw; 10-01-2012 at 02:16 PM. Reason: clarity
Tommy Walker in Alabama
Sorry for the cell phone picture, but here is an update. I got my wings rigged. I needed to have a couple of friends come by to lift the wings onto the plane & help with some of the measurments.
Scott
I put some updated pictures into my photo albums. You can check them out here.
http://www.teamkitfox.com/Forums/album.php?albumid=298
I Got my fuel tanks installed today. I used NPT plugs to seal the holes when rinsing the tanks with Acetone. Thought I would share that tip. The Strapping tape comes off pretty quick when the acetone hits it.
Next I'm going to install the rest of the false ribs, then work on the leading edge kit.
Looking good. Keep those pictures coming.
I added some pictures to my wing album. Laker Leading edge kit installation.
http://www.teamkitfox.com/Forums/album.php?albumid=298
Enjoy.
Scott
Last edited by AirFox; 11-14-2012 at 05:22 PM. Reason: forgot to add the link