These are the things I am glad I ordered ahead of time.
60 ml syringes
More Dixie cups (waxless)
Numbered drill bit set.
9/32 drill bit (for door latch holes. Manual calls for a .280 hole)
#30 drill bits (a dozen)
#40 drill bits (6)
A couple hundred popsicle sticks
6 foot level (for setting dihedral)
A few rolls of painters tape
Cloth swatches. ( I cut hundreds from T-shirt material). I use them for cleaning up after applying hysol to everything. Paper towels will work, but leaves behind bits of paper.
Dremmel tool and about 40 of the reinforced cutting wheels. The regular cutoff wheels wear out way too fast.
10 to 15 of the larger drum sanding parts, and 10 of the smaller diameter sanding drums.
Scotch sanding pads (7447 I think, they are maroon colored)
Wow, great list, thanks Flyboy!
Paul
Building STi
Rotax 915is
MT Prop
Oratex
N951CT
Someone else had a builders wishlist here. I just added a couple things.
Funny, I was never a fan of green til I saw the s7 speedster that Kyle Franklin flew. And your powdercoat looks like the same green. It's beautiful.
SS7 O-200 Whirlwind
Yes, and when you decide to do a color like this, you have real second thoughts, doubts, but... I have a vision. We'll see how it works out! Thanks.
Paul
Building STi
Rotax 915is
MT Prop
Oratex
N951CT
I do like the green powdercoat, but I'd consider painting the tubes a dark color where they will reflect off the interior of the glass.
Holy cow I'm jealous of your build space. I think my paint would have turned out better if I'd had the space to construct a proper paint booth.
--Brian
Flying - S7SS
Nice setup and it's coming along nicely!!! I grew up in Yuma!!
Flying SS7, G3X, 912iS
https://mountainfoxbuild.wordpress.com/
Yes, I have read on this forum about the reflections. I'll have to wait and see if that bothers me or not.
Paul
Building STi
Rotax 915is
MT Prop
Oratex
N951CT
My bearing press:
IMG_4671.jpgIMG_4673.jpg
Paul
Building STi
Rotax 915is
MT Prop
Oratex
N951CT