Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser CPS Parts EarthX Batteries
Page 21 of 21 FirstFirst ... 111718192021
Results 201 to 206 of 206

Thread: Aus S7 Kitfox

  1. #201
    Senior Member efwd's Avatar
    Join Date
    Jun 2015
    Location
    Yorba Linda, CA
    Posts
    1,698

    Default Re: Aus S7 Kitfox

    I really like the panel. Although mine is a polar opposite with all the glass I have but I would love to build another with a steam gauge set up.
    Eddie Forward
    Building
    SS7, 912iS, Garmin G3X

  2. #202

    Join Date
    Feb 2014
    Location
    Sale Australia
    Posts
    149

    Default Re: Aus S7 Kitfox

    The latest project has been a tail wheel bracket for the T3, I have felt that this is a week point and have herd of the bracket cracking thatís attached to the tail post.
    I have designed a 6061 billet fitting that replaces the mount brackets of the T3 and ties the original mount points together as well as picking up on the cross tube intended for the transport braces. This should share the torsional side loads better and not load up the tail post bracket so much. it does add .9 of a pound (400grams) but as I am running the Lycoming it should work out nicely with the w&b.

    I ended up getting 4 fittings machined up as it was going to be a costly exercise just to make one and not much more for the extras. If anyone is interested I will have 3 spare to sell at what they cost me which is $690 AUD each + shipping (roughly $490 USD)
    Iím not sure if all the cross tubes will be welded in the same spot so I have left this hole un drilled.
    If purchased, buyer must take full responsibility for the modification.

    3B9BE6C7-76D8-4196-B47D-E18D01561517.jpg914C086F-D0E1-479A-92BF-14D49845B71C.jpg68C72B92-CDB7-4D7E-A097-3544350E9B0E.jpg6E260896-9B22-4C95-87BC-55D4F669B72F.jpg
    Regards Ben

    Victoria Australia
    S7 Kitfox 233

  3. #203

    Join Date
    Oct 2016
    Location
    Western Australian
    Posts
    190

    Default Re: Aus S7 Kitfox

    That doesn't look like it's going to shift in a hurry. Lovely bit of workmanship

  4. #204
    Senior Member colospace's Avatar
    Join Date
    Oct 2009
    Location
    Littleton, CO
    Posts
    309

    Default Re: Aus S7 Kitfox

    Ben, your going to need to get that plane to OSH somehow so we can all see the stuning work up close. Maybe you should ship it over and do a tour of the USA before/after.
    - Gary
    S7 SuperSport Tri-gear
    w/Rotax 912, Oratex, Dynon
    (still building)

  5. #205
    Senior Member
    Join Date
    Jun 2008
    Location
    wales,ny
    Posts
    382

    Default Re: Aus S7 Kitfox

    Some amazing craftsmanship and engineering going into this build. Nice job Ben. Bruce N199CL

  6. #206

    Join Date
    Feb 2014
    Location
    Sale Australia
    Posts
    149

    Default Re: Aus S7 Kitfox

    Thanks, I appreciate the kind comments!
    I promise this is the last thing I pick on to mod.... I hope.
    Its time to get this bird flying!
    Regards Ben

    Victoria Australia
    S7 Kitfox 233

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •