Hey Bob, Brandon and I reviewed how I was checking my rigging to make sure I hadn’t done something incorrectly which I had not. He then explained that adjustments to the lift strut rod ends would not change sweep and only change dihedral and washout, which were within the correct range already. He had calculated the sweep value based on my measurements and determined that I effectively have under a 10th of a percent sweep to the rear of the aircraft. He assured me this will not cause any handling issues and that I likely would not be able to notice the difference even flying aircraft back to back that had been rigged exactly by the book and like my own is rigged. So no adjustments were needed at this time.

As always I really appreciate the prompt way Brandon and Kitfox as a whole addressed my concerns.