Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 309

Thread: Joe Ruscito's Kitfox S7 Build

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member efwd's Avatar
    Join Date
    Jun 2015
    Location
    Yorba Linda, CA
    Posts
    2,830

    Default Re: Joe Ruscito's Kitfox S7 Build

    That's great Joe. Welcome aboard.
    Eddie Forward
    Flying
    SS7, 912iS, Garmin G3X

  2. #2
    Senior Member
    Join Date
    Jun 2008
    Location
    wales,ny
    Posts
    715

    Default Re: Joe Ruscito's Kitfox S7 Build

    Joe , you have the right attitude going in, enjoy the process as much as the result, you are embarking on a fun journey. Bruce N199CL

  3. #3

    Join Date
    Jul 2018
    Location
    Westfield, IN
    Posts
    187

    Default Re: Joe Ruscito's Kitfox S7 Build

    I get my kit in about 6 weeks. We will have to compare notes. Good luck!!!

  4. #4
    Senior Member jmodguy's Avatar
    Join Date
    Jul 2014
    Location
    Carmel, IN
    Posts
    744

    Default Re: Joe Ruscito's Kitfox S7 Build

    6 weeks? Crap that’s pretty soon!
    Jeff
    KF 5
    340KF

  5. #5
    Bryan's Avatar
    Join Date
    Oct 2008
    Location
    Collinsville, OK
    Posts
    105

    Default Re: Joe Ruscito's Kitfox S7 Build

    Welcome aboard Joe. You will love it. These are great kits and the build is so much fun. Enjoy every minute of it and the forum is sooo much help. Keep the excitement going.

  6. #6

    Default Re: Joe Ruscito's Kitfox S7 Build

    Hey Joe
    Good to see another Kitfox build in the works. I started in October and am having a blast. It is so fun to see things start to take shape.
    Joe Gallagher
    Flying 7SS

    http://frontierfox.home.blog

  7. #7
    Senior Member aviator79's Avatar
    Join Date
    Dec 2016
    Location
    Los Alamos, NM
    Posts
    913

    Default Re: Joe Ruscito's Kitfox S7 Build

    Welcome to the fun part, Joe! I look forward to following your progress.
    --Brian
    Flying - S7SS

  8. #8
    Senior Member
    Join Date
    Nov 2017
    Location
    Bailey, CO
    Posts
    225

    Default Re: Joe Ruscito's Kitfox S7 Build

    Here are some things to acquire if you don’t already have them.

    If you bought the tool kit from Kitfox, I would get an extra #30 and #40 drill bit (12 inch)

    Amazon- 60 cc syringes (15 to 20)

    Ace Hardware/Home Depot- 2 gallons denatured alcohol (cleanup of Hysol)

    Harbor Freight- spring clips (to hold ribs and other stuff in place 10 small and 10 medium)

    Amazon extra #30 and #40 drill bits (10 each- regular length)

    Amazon- food scale. One that will do grams. Sometimes Hysol is needed in small quantities and a scale that does ounces isn’t precise enough in my opinion.

    A couple hundred Dixie cups (small and not wax coated)

    Amazon. Hose clamps to fit a 3” hose (for holding the lift strut brackets in spar while setting sweep, dihedral and washout) 4 of these.

    Extra clecos. 20. For the #30 holes.

    Order extra rivets from Kitfox. Feel free to message me and I will tell you which ones and how many. You will probably have to drill out a few rivets because they didn’t seat properly.

    Aircraft spruce- AN3-4, AN3-5 bolts and the nylock nuts to fit them (20 or so of each). AN960-10, and AN960-10L washers. 50 of each. They are used for everything and it is nice to have extra hardware. Spruce charges about 8 bucks or more for shipping even for smaller orders so get a list together when you need stuff and order it all at the same time.

    There are other things, but I can’t remember them right now.

    Steve

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •